Livestock Water Trough 1.8m (6ft)

Suitable for all livestock, our best selling water trough is manufactured from 1.6mm flat steel, sheet folded, welded and then fully galvanised to BSEN ISO 1461. It features a rolled top for added strength and stability and comes with a drain plug and bung as standard.

Did you know our water troughs also make ideal designer planters?

Options available - 

Our livestock water troughs are available in the following sizes: (all models are 457mm (18”) wide and 405mm (16”) deep)

• 915mm (3ft) long 163ltr (36 gallons) capacity - No horizontal cross brace
• 1220mm (4ft) long 218ltr (48 gallons) capacity - No horizontal cross brace
• 1525mm (5ft) long 272ltr (60 gallons) capacity - No horizontal cross brace
• 1830mm (6ft) long 327ltr (72 gallons) capacity - One horizontal cross brace
• 2440mm (8ft) long 436ltr (96 gallons) capacity - Two horizontal cross braces
• 3050mm (10ft) long 545ltr (120 gallons) capacity - Two horizontal cross braces

Features –

• Roll top trough for added strength & stability
• Drain plug & bung come as standard
• Manufactured in 1.6mm flat steel sheet folded, welded and then galvanized to BSEN ISO 1461

For sheep we also stock the lower 250mm (10") deep troughs in four sizes. For dairy herds or where larger volumes of water are required, such as allotments, we also stock 0.6m deep troughs in various lengths.

A service box for housing the ball valve assembly is available separately and is not supplied with this water trough. It can be centrally or end retrofitted. Three wrap round brackets provide a strong fix.